A Canadian Company Established in 1959!
WB-FR Standard Access Door with Plaster
Construction Features:
Door:18 ga. steel.
Box Return Frame: 16 ga. steel. These models have a 3" wide perforated flange of 24 ga. galvanized material. The space from the expanded flange to the 1/4" Safety edge of the door will accommodate 1" of plaster.
Insulation: 1-7/8" thick mineral wool, contained within door cavity.
Hinges: Fully concealed, pivot type hinge. Allows opening to 170 degrees.
Latches: Self-latching direct action latch, opposite hinge. The latch will accept both key and knurled knob which will be included with each door.
Automatic Panel Closer: Furnished on all doors
Inside Panel Release: Furnished on all doors
Finish: Electrostatically applied baked grey enamel coat over rust-inhibiting phosphate treated steel. This coating can be used as a finish or as a prime coating.
Optional Finish: (AT EXTRA COST) Stainless Steel Type 304 or Type 316 No. 4 Satin Finish. Stainless Steel "B" label door up to and including 36" x 36" size. (S.S. throughout Model WB-FRSS Standard, WBFR Standard SS w/ Plaster Bead). Zinc Coating.
Options:(AT EXTRA COST) Mortise Cylinder Prep or Flush lockable paddle latch (Key Code 151), Smoked Seal Gasketing.
Ceiling Installation: To comply with current fire regulation, largest size acceptable is 24" x 36"
