Swan Air Compressors

Swan Air Compressors

Dry Pipe Sprinkler Compressors

-

(ONLY AVAILABLE IN OUR ALBERTA AND BRITISH COLOMBIA BRANCH LOCATIONS)

-


National Fire Equipment Ltd. carries a full range of dry pipe sprinkler compressors.

 

We also stock accessories:

  • Vibration Pads
  • Pressure Switches
  • Check Valves
  • Compressor Oil
  • Safety Valves
  • Air Line Filters
  • Air Dryers
  • Magnetic Starters
  • Electric Automatic Drains

Base Mounted Compressors

  • Air Cooled Piston-Type Compressor
  • NEMA Standard / UL Listed Motor
  • ISO 9001 Single Stage Pump
  • Fully Enclosed Belt Guard
  • Swan Base Mounted Air Compressors are specifically designed for dry pipe sprinkler systems. Units will fill a system to 40psi in 30 minutes (according to NFPA-13). Base mounted units include a compressor pump, motor with v-belt drive, intake air filter and fully enclosed belt guard, mounted on a steel base with drilled holes. Automatic start/stop operation of base mounted compressors is achieved with the use of a Control Kit.

    Control Kit

    Automatic Control Kits are used to start and stop base mounted compressors. Standard pressure is set to cut-in at 30psi and cut-out at 40psi. The Control Kit includes a heavy duty UL Listed pressure switch with built-in unloader valve, a check valve, drain cock and fittings with 1/2" NPT Outlet.

    Tank Mounted Compressors

  • Air Cooled Piston-Type Compressor
  • UL Listed pressure switch
  • ISO 9001 Single Stage Pump
  • A.S.M.E. Air Receiver Tank
  • NEMA Standard / UL Listed Motor
  • A.S.M.E. Safety Valve
  • Fully Enclosed Belt Guard
  •  

    Swan Tank Mounted Air Compressors are specifically designed with similar specifications to the base mounted units. Standard units include an automatic start/stop control system, so a separate Control Kit is not needed. Units are mounted on a tank to create a constant source of air which can be used to supply multiple dry-pipe sprinkler system. Tank mounted units include a compressor pump, motor with v-belt drive, intake air filter, fully enclosed belt guard, mounted on an A.S.M.E. air receiver tank with mounting holes. Also included are a heavy duty pressure switch, check valve, safety valve and a pressure gauge. Contact the NFE branch office nearest you for more information on these top quality air compressors!


    Product Data: Swan.pdf (2.8 Mb)

    © 2004-2014 National Fire Equipment Ltd.
    Design & Hosting by ICM Consulting